Shark Cake

It's no secret my friend Ann likes to throw theme parties.  More people really should - they're such fun! The latest theme party happened a few weeks ago and was inspired by two HUGE cultural obsessions of the moment - Shark Week and Sharknado.

A shark party, you may ask? How fun could that really be?  Well let me assure you there's nothing like a crazy shark flick, silly costumes, thematic food, a giant remote controlled helium balloon shark, and crazy friends to make a fantastic evening!  I'll share a few pictures from the night later, but first I'm going to show you how to make a super-cute shark cake that will impress your guests (and not cause you too much of a headache).

This cake will serve between 12-16 people.  Use this post as a how-to if you'd like to make this cake yourself...or just enjoy the progress pictures!  It's kind of fun to see how it comes together!


Here's what you'll need

Three 8" square cakes
Buttercream frosting
Fondant
Black gel color
Brown gel color
Blue gel color
Red gel color
Crisco
Toothpicks
Wooden skewer
Rectangle cake board

And here's how to assemble your shark cake...

1 - Cut two of your 8" cakes so they are 5" x 8".

2 - Now you're going to stack your shark.  Place the two 5" x 8" takes on top of each other.  Then place the two extra strips you cut off together on top of those (to make three layers).

3 - Ice between these three layers, re-stacking.

4 - Spread some icing on a cake board and place your cake on top to secure it.  Then ice the outside of the your cake and refrigerate for 1-2 hours until icing firms.

5 & 6 - Now it's time to carve the cake!  First we're going to carve the shark's mouth.  It's a good idea to trace out your cuts with the tip of your knife before cutting - you can always take more cake off, but you can't add it back on!  This cut should start at the top of the 2nd layer of cake and curve down to the cake board, but should not go all the way through the cake.  You're actually going to cut a chunk out of each side, leaving about 3" in the middle, which will be the boat.

7 - Carefully angle the first layer until it reaches to top of the boat.  This angle should not be as steep as the mouth angle.

8 - Cut a 5" x 3" piece out of your third 8" square cake, and place it on the board at the back of your shark.  With the tip of your knife, trace the shape of your shark on one side of the cake.  Once you're happy with the curve of the shark, begin cutting pieces of cake off until you're happy with it!  Just remember - cut carefully - you can always take more off.

9 - Continue taking bit by bit off your shark - round the corners at the top (sharks aren't square!), smooth the edges of the cake...get creative - he's your creation!  Add a small (two layer) piece of cake to the front of the boat, so it extends about 1.5" past the top of the shark's mouth.  This is going to be the tip of the boat your shark is chomping on.  (If this little piece tries to fall off, use a toothpick to attach it to the rest of the cake.)

10 - Carefully shave away at the "boat" until it looks like a boat.  Your boat should be narrower at the tip, slope inward at the bottom, and have a lip (the railing) around the outside (so pull a little cake out of the inside top).  Cut away most of the excess board so it mirrors the body of the shark.  Do not cut the board to fit the shape of the boat too - it will be too flimsy.  We'll cover that up later!  Then ice the entire cake and place it in the refrigerator for 1-2 hours to set.

11- Mix grey fondant (white with a little black), until the color is consistent.  As you're working with fondant, you'll need to add a little Crisco to the ball so it doesn't stick to your hands.  Tape two sheets of wax paper on a flat surface and cover it with Crisco.  Roll out your grey fondant so it's about 1/4" thick, then carefully cover your shark body.  Using scissors or an exacto knife, cut the grey fondant so it ends at the edge of the sharks "lips".

12 - Mix pink fondant (white with a little red), until the color is consistent.  Roll out small pieces and fill in the area that would be the shark's open mouth.

13 - Mix light brown fondant (white with a little brown), until the color is consistent.  Roll out a piece and cover the entire boat in one move.  Cut three long, thin strips of the brown, that will be the upper rail and "boards" on the front of the boat.  Measure the appropriate lengths and attach to the boat by dabbing a little water on the back of the "board".  (Water helps fondant stick to fondant.)  Using a butter knife (or the side of the fork), gently draw the rest of the boards along the sides of the boat.  Place the cake back in the refrigerator for another hour while you work on steps 14 and 15.

Roll out more pink fondant and cover the rest of the inside of the mouth.

14 - Now it's time to make the accessories!  Roll out some white fondant and cut out teeth that are approximately 1/2" long.  Cut toothpicks in half and slide the toothpick halfway in the tooth.  Set these aside so they dry - the worst thing that could happen to your shark cake is for it to have floppy teeth!

15 - Roll out more grey fondant (thicker than the teeth).  Using a pizza cutter, cut out the shape of a shark fin.  Slide three toothpicks along the edge that will touch the shark so they are about 1/3 in the fin, 2/3 sticking out.  Let the fin set until it's completely dry.  (Second worst thing would be a floppy fin...)

Now it's time to make the mast for your boat.  Make a little "snake" of brown fondant.  Wrap the fondant carefully around about half of a wooden skewer and carefully roll it with your hands until it's no longer lumpy.  Cut out a rectangle piece of red fondant (add a little more red gel to the pink that's leftover from the shark's mouth) and attach to the top of the dowel using a little water.  If you have food-safe markers, feel free to decorate the flag.  I decided to go with a K, for Krentz (the last name of the friends throwing the party).  Nothing like having your shark eat the family boat of your hosts!  ;)

Once your shark's teeth are hard, stick each one around the rim of the shark's mouth.  Using small ovals of white fondant, place on the shark's eyes (attach with a dab of water).  You can draw on the pupil with a food-safe marker or by adding a smaller dot of black fondant.  Then, using a butter knife or edge of a fork, carefully etch in the shark's gills (three on each side).  Be careful not to cut through the fondant - you just want to etch them into his skin.

Then it's time to work on presentation.  Every shark should be in water, so we're going to do just that by covering a small, rectangle cake board (you can cut a larger one to the shape you'd like).  Mix light blue fondant (white with some blue), until the color is consistent.  Spread a very thin layer of white icing  on the cake board, roll out your blue fondant, and cover the board.  The fondant should  just go over the edges of the board, so use scissors to trim.

Spread more white icing down the middle of the covered board, and place your shark cake on top.

Color some of your buttercream icing with blue gel and fill a piping bag (or a Ziploc bag with one corner cut off).  I didn't use a piping tip for this - I just cut the tip off the disposable piping bag.  Fill your bag with the blue icing, and pipe waves around your shark.  Make sure your waves cover up the white board around your boat, then go down the sides of the shark.  The piping motion you'll be using is more pressure at the beginning, then less pressure as you pull away.

The final touches are the fin and boat mast - carefully stick the toothpicks into the shark's back, where you'd like the fin to live.  Then stick the end of the boat mast in right at the back of the boat, coming out at an angle.

Make sure your cake stays in the refrigerator until you're ready to serve.  Then remove about 45 minute to 1 hour before you're ready to cut in!

Follow Much Ado About Somethin on Facebook 

for fantastic recipes, cake how-to's, and diy projects!

Now for a few pictures from the party!

Now...go wow your friends!

Easy Flower Cupcakes

Happy Friday!  Today I had the pleasure of guest posting over at DIY by Design.  Judy's blog is one of the first I started following when I began blogging 10 months ago, so I was excited to have the opportunity to share a cupcake how-to while she's on vacation!

If you're new here, I hope you'll become a follower and stick around!

Follow Much Ado on Bloglovin...
...or Facebook...
...or Pinterest...
...or on Twitter...
...or your favorite reader!

It's been a HOT week here in Boston - it finally feels like summer!  To celebrate, I decided to put together a simple summery flower tutorial.  There's no need for lots of "cake gear" or previous experience for this cute  flower.  It just boils down to 5 dots and a swirl!

Make several different colors of icing and you'll end up with a colorful bouquet of flowers at the end - perfect!

Check out the complete how-to here!

Interested in other cake tutorials?  Check out some of my other designs here, here, here, here, and here!

Thanks again, Judy, for letting me crash your blog!

Cake Decorating How-To: Berry Basket Cake - A fun summer cake!

Saturday night, my fabulous husband had his dissertation piece performed at Brandeis University!  To complete the dissertation (FINAL!) phase of his doctoral program, he has to write a dissertation piece and paper.  His piece was a song cycle for soprano, clarinet/bass clarinet, and piano, which I'll post recordings for once they come in.

I decided to make a cake for the concert's reception.  I was going to make a Star Wars cake (since the concert took place on May (the) 4th (be with you)), but realized a little late in the game I'd need more fondant than I had for that.  Instead, I decided to make a fun spring/summer cake.  Besides the flowers that are starting to bloom all around us, I'm most excited about berries coming back into season.  No more tasteless strawberries!  Because of this, I decided to make a "berry basket" cake!  It's a super cute cake topped with fresh berries.

Here's how to make the cake

Bake two 8" cakes.  Travis requested my Chocolate Stout Cake with chocolate buttercream icing.  Then...

1 - Once they cool, level the tops (cut off the rounded tops so they stack evenly!), and cut them into four inch squares.

2 - Stack one square on top of the other, with a generous layer of icing between!  This will be your basket.  I made three baskets for my cake.  Each basket should be on a piece of cardboard.  Once stacked, put your baskets in the refrigerator (uncovered) for 45-60 minutes.

3 - Now it's time to shape your baskets.  This is a pretty simple carve - the baskets are a little smaller at the bottom than top, so carefully whittle away the edges until they're smooth.  Then cut the middle out of the top, leaving a thin edge of cake.

4 - Here's what your baskets will look like once cleaned up a little!  If there are some holes, don't worry - you can fill them in with icing.  :)

Now to give your baskets a thin layer of icing.  You'll want to thin some of the icing you're using with a little water so it glides on easily.  Give the baskets a thin layer all over, then refrigerate for 1-2 hours to let the icing set.

Remove these from the refrigerator and add a second layer of icing.  Make this icing as smooth as possible, since fondant takes the shape of whatever is under it!  Make sure to trim the piece of cardboard down so they are the size of the bottoms of the baskets now too.  Then give these puppies another short stint in the fridge.

While the cake baskets are in the refrigerator, start mixing the fondant that will cover them.  I used "Kelly Green" Wilton gel coloring.  You'll need to add Crisco to the fondant as you mix the color in, or it will get very sticky and tough to work with.

Spread Crisco over some wax paper or (clean) counter top and roll out some of your green fondant.  If your baskets are the same size as mine (4"x4"x4.5"), that means you need a 16" x 5.5"

Wrap this around circumference of the basket and over the top lip.  The center of the top will still be exposed, but that's ok!  Clean up the "seam" with an exacto knife to keep things tidy.

Now it's time to cut the drainage holes around the bottom.  Remove the fondant and use a skinny tool (or toothpick) to pull out about 1/4" of cake.  Then, using a rounded tool (or your clean finger) and push the remaining cake to smooth out the cut-outs.

Now to add the top lip.  Roll out another, thinner strip.  Mine was about 1.5" wide and 16" long.  Fold the top 1/3 over on itself.

Then, with a paintbrush, brush water along the top 1/2" of the basket, where the strip you just made will go.  (The water helps fondant stick to fondant.)

Wrap the strip around the top of your basket, with the doubled-over edge sticking up above the top of the basket (facing in).

Then fill the tops of your baskets with your (washed and dried) fruit.  I chose strawberries, blueberries, and blackberries.  You could also use raspberries or cherries if you'd like!  Put the baskets back in the refrigerator.

Now it's time to make the board for them to sit on.  Presentation is always key to a great cake.  These would be nice sitting on a table as is...but are even better on a cute board to tie the entire thing together!  I decided to make a checkered tablecloth board.  I used a large, rectangle, piece of cardboard as the base.

Mix some red fondant (I used "No-Taste Red") and roll out each color and cut 1.5" squares.  Put a thin layer of clear piping gel on the board, then layer the squares in a checkered pattern!

Then place the baskets on your beautiful board with some more piping gel.  Then cut a (yet another) thin green strip about 1/4" wide and wrap it around the bottom of each basket.

Cake's done!  Now, add a few more berries around the bottom of each basket and impress your friends with your super cute cake.

This was a huge hit at the reception - no one guessed it was a cake until they were told!

Later this week, I'll tell you about our celebratory dinner out and post some recordings from the concert!  Check back for more!

My First Guest Post - Pink Valentine Cupcakes

Hello Much Ado friends!  It's been a fun week for blogging.  In the last week, I hit 10,000 views on my blog, had my first feature in a weekly wrap-up (my Blackberry-Honey Frozen Yogurt)...and now I'm excited to announce my first guest post!

I'd chatted with Elena over at 'A Casarella after awarding her the Liebster Award, and I told her I'd be happy to put together a Valentine's Day cupcake how-to for her readers.  I decided to put together several decorations you can make with one icing color and one decorating tip - no need to buy lots of tools for one day.

If you popped over from 'A Casarella, make sure to subscribe so you don't miss future posts!

Here are a few pictures to wet your whistle, but you'll have to check out her blog for step-by-step instructions so you can make them.

Pick your favorite design or do all three - they look great together too!

I posted another Valentine's Day cupcake blog last week with swirls of icing and fondant hearts - check it out for more V-day inspiration.

Thanks again to Elena for letting me crash 'A Casarella today, and I hope you all have a happy, delicious, and sweets-filled Valentine's Day!

Avengers Birthday Cake

This weekend, our little friend Berkeley had his fourth birthday party!  Berkeley is by far one of my favorite kids, so when his mom, Laci, asked me to make an Avenger's cake for his birthday, the answer was YES!  He's the most fun to see excited - how could I pass this up!

Not having a 4 year old, I didn't know much about the Avengers, so I was glad Laci had pinned a few cakes she thought Berkeley would like.  I decided to feature 3 characters - Captain America, the Hulk, and Thor (or more specifically, his hammer).  The cake needed to feed 25-30 people (10 of which were under the age of 5), so I made the bottom later an 8" cake, the top a 6" cake, and baked a dozen cupcakes.

I thought it would be fun to show the step-by-step process with this cake.  What you'll probably learn from this is that cake decorating is mostly finding creative ways to cover up errors!  If I didn't show you the holes I left (or made...) as I went, I bet you'd never known they were there!

The moral of this story - don't let cake decorating scare you!  When in doubt, just add a flower...or star...or cute garnish, and no one will know you didn't mean to do that.

To make the hulk head first I leveled and iced two 6" cakes.

Then...

1 - Roll out green fondant and wrap it around the edge of the cake.
2 - Put a little cap of fondant on the top so the green edges don't show through his hair too much later.
3 - Roll out some black fondant large enough to cover the top of the cake and hang down about 1" on all sides.  This is the hulk's hair!
4 - Give him a haircut!  (I used my kitchen scissors.)

Then give him a face!  I laid the face out on the counter and worked on the "angry eyes" and "angry teeth" until it was juuuuust right before putting it on the cake.  Any time you're attaching fondant to fondant, you'll want to do so with water and a paintbrush.  Don't overdo it with the water (it doesn't take much), or the water will squirt out and stain the fondant.  Once the hulk was done, he went back into the fridge to "set".  Always keep your cakes in the fridge if you're not working on them.

Next up was the Captain America tier.

Start by rolling out and covering the 8" cake with blue fondant.  Since I was going to be putting red and white rectangles around the bottom 2/3 of the cake, I didn't mind the blue didn't meet the bottom of the cake.  Again - it'll be covered up!  :)

Next, roll out red and white fondant and use a embossing/cutting tool to cut 2.5"x 2.75" rectangles.  You can buy these tools at Michael's or AC Moore - they come in handy!

Once you have all the strips cut, it's time to put them around the cake.  Turn each rectangle over and brush water on the back before sticking it on the cake.  You may have to trim the last rectangle a little so it will fit - just make sure that one lands on the back!

Once all the red and white stripes are on, take your scissors and trim the bottom edge so it's even.

Then it's time to stack.  When stacking cakes, it's important to add support in the bottom layer, so it doesn't "poof" out from the weight on top of it.  I keep wooden skewers with my cake gear and cut them the appropriate height, which works nicely.  It's also important to add a layer of "glue" before you stack cakes, so smear a little icing around the skewered area too.  The last thing you want is for the top layer to slide off your cake when you're taking it to the party!

The last hero to be represented was Thor.  Since Thor's hammer was going to be pretty small, I decided to make it out of Rice Crispy Treats instead of cake.

Once the treats cool...

1 - Press some into the shape of the hammer head.
2 - Carefully ice with leftover buttercream icing.  This should help fill in holes and make the object more smooth.  Fondant will show every bump, so you want to make sure it doesn't have any (many) krispy bumps!  Then stick the iced hammer head in the fridge for 30 or so minutes so the icing starts to set.
3 - Roll out grey fondant and cover the hammer head!  Since the ends of Thor's hammer have some texture, I just wrapped mine like a present, folding the edges over themselves.  Super easy.  Then I stuck a half skewer in the center of the hammer head and wrapped brown fondant around it.  No need to make the brown perfect...just even, because you're going to make it look like it's wrapped in leather.

4 - Roll out a long, thin strip of brown fondant and wrap the handle from bottom to top.
5a - Cut two more long strips of fondant.  Starting at the bottom, wrap up on the diagonal, criss-crossing the strips so they make an X.  For the tassels  cut two (even smaller) brown strips.  Twist them so they curl a little and attach them to the top of the handle with a dab of water.  Then shape a brown "button" with fondant and attach it to the end of the handle.
5b - I had some Wilton Pearl Dust, so I decided to give the hammer head a metallic look.  You do this by just brushing on the dust with a clean, dry, paint brush!

Then it was finally time to put it all together.  At this point, I realized I'd forgotten the star on the bottom layer, so cut one out with a star cookie cutter and stuck it on.

Follow Much Ado About Somethin on Facebook 

for fantastic recipes, cake how-to's, and diy projects!

Laci had their house covered in Avengers gear and had games prepared like "pin the star on Captain America" - what an awesome mom.  She had the best area prepared for the cake.  If you look closely at the picture below, you'll see Laci decoupaged Berkeley's name with Avengers comic book pictures.  So awesome!

Just for kicks, here are a few pics of the awesome Gentry family.  You can see more pics of the cake and party here!